Free generator inspection checklist
Free generator inspection checklist (PDF-ready). Covers engine, fluids, electrical output, RCDs, earthing, safety and compliance. Download free.
Updated 3 May 2026
Generator Inspection Checklist
Pre-use & periodic inspection record: complete before each operation
External & Physical Condition
Fluids & Levels
Engine & Mechanical
Electrical Output & Controls
Safety Equipment
Compliance & Documentation
Inspector Sign-off
Signature
Print name
Date & time
Supervisor / Reviewer Acknowledgement
Signature
Print name
Date
How to use: download the PDF, print or complete digitally on any device.
- PDF format, ready to print or fill on screen
- Use as-is or customise to suit your operation
- Go digital in MapTrack for photos, alerts and audit trails
Two ways to use it
Use in MapTrack →Use it digitally instead
Unlimited usersThese same 37 checks, already built.
- Scan the asset’s QR tag with any phone
- Submitted forms can trigger alerts
- Photos on fails, audit-ready records
- Export responses, PDF reports with your logo
Free trial. No credit card needed.
Trusted by teams across Australia and New Zealand
We respect your privacy. Unsubscribe anytime.
These templates are free general guides provided as-is. They do not constitute legal, safety or compliance advice. You are responsible for ensuring any form meets your specific workplace obligations, industry standards and applicable regulations.
Don't just download it - use it live. Start a free workspace with this generator inspection checklist already built, so your crew can run it from a phone.
Commercial Director
Key takeaways
- The MapTrack generator inspection checklist contains 37 checks across 6 sections. Sections covered: External & Physical Condition, Fluids & Levels, Engine & Mechanical, Electrical Output & Controls, Safety Equipment, Compliance & Documentation.
Enter your email below to download this generator inspection checklist as a ready-to-use PDF.
Used by construction, mining and field service teams
What is a generator inspection checklist?
A generator inspection checklist is a structured list of tasks and checks to perform before operating a generator. It helps operators, electricians and site supervisors confirm that the generator is mechanically sound, electrically safe, properly earthed and compliant before it is put under load. The checklist should be completed before each use or at the start of each shift and is a key preventive measure to catch faults, such as fluid leaks, damaged cables or tripped breakers, before they create a safety incident or equipment failure.
Generator inspections are required on most Australian construction, mining and industrial sites and align with obligations under WHS legislation, AS/NZS 3000 (wiring rules), AS/NZS 3760 (test and tag) and site-specific electrical safety management plans. Generators present both electrical and mechanical hazards including electrocution from faulty earthing or damaged cables, fire from fuel leaks or overheating, carbon monoxide poisoning from exhaust in enclosed spaces, and noise exposure. A thorough pre-use inspection addresses all of these risk categories in a single structured process.
AS/NZS 3010:2017 (Electrical installations: Generating sets) sets out specific requirements for the installation, earthing and protection of generators used to supply electrical power. Section 5 of the standard addresses earthing systems, while Section 6 covers protection against overcurrent and earth fault. Under WHS Regulations 2011, Chapter 5, Part 5.1, a person conducting a business or undertaking (PCBU) must ensure that plant is maintained so it is without risk to health and safety and that inspections are carried out by a competent person. Failure to maintain a documented inspection regime for generators can result in enforcement action from the WHS regulator, void insurance coverage for electrical incidents, and expose the PCBU to prosecution where a foreseeable hazard was not controlled.
Learn more about compliance and inspections in MapTrack.
Benefits of using this generator inspection checklist
- Electrical safety: identify damaged cables, faulty RCDs and earthing issues before personnel connect loads.
- Prevent equipment failure: catch low oil, coolant leaks or worn belts before they cause a breakdown mid-shift.
- Fire and fuel risk management: confirm spill containment is in place and fuel lines are secure before start-up.
- Compliance: meet WHS, electrical safety and principal contractor requirements and demonstrate due diligence.
- Consistency and accountability: a standardised checklist ensures critical items are never skipped across operators or shifts.
- Maintenance recordkeeping: build a history of run hours, fault trends and service intervals tied to each generator asset.
Benefits of digitising forms in MapTrack
When you digitise generator checklists in MapTrack, you get:
- Field users can easily scan a QR code to complete a form on mobile. Unlimited users.
- Automatically get alerts when faults are identified.
- Link every form digitally as a PDF to the relevant asset, location or person.
- Receive a digital PDF copy with every submission to your email.
- Ability to share forms digitally.
- Build conditional logic (show or hide questions based on answers).
- Take pictures or attach photos. Not possible with a paper-based form.
- Electronic signatures.
- Edit forms later without reprinting.
- Restrict permissions (who can view, complete or approve).
- Build forms with AI (describe what you need and MapTrack suggests the form).
- Escalate critical hazards instantly to safety managers via push notification.
- Maintain an auditable safety register that satisfies WHS regulator requests.
- Correlate incident trends across sites with built-in safety analytics.
Book a demo to see how MapTrack handles generator checklists.
Try MapTrack free for 30 days
Full access to every feature. No credit card required. Per-asset pricing so you scale as your fleet grows.
- No credit card required
- 30 days free trial
- Cancel anytime
1-2 days/week saved
“Bloody amazing! We used to spend 1-2 days a week tracking and managing our generators alone.”
Steve McAllister
Asset Coordinator, Saunders International
What to include in a generator inspection checklist
This generator inspection checklist covers 9 key areas:
- Generator details: asset ID/serial, make/model, site/location, date, inspector name, current run hours and next service due.
- External and physical condition: housing, ventilation, frame and mounting, exhaust, fuel system, spill containment bund, labels and general cleanliness.
- Fluids and levels: engine oil, coolant, fuel level and visible leaks.
- Engine and mechanical: air filter, drive belts, cooling fan and guard, battery, hoses, start-up behaviour and unusual noises or vibration.
- Electrical output and controls: output voltage and frequency, control panel indicators, circuit breakers/MCBs, RCD/safety switch (push-button test), earth/ground connection, cables and leads, outlet sockets, auto-start/transfer switch, emergency stop and hour meter reading.
- Safety equipment: fire extinguisher, PPE requirements and exclusion zone.
- Compliance and documentation: test and tag currency, service record, operating manual on site and any permits or electrical safety compliance documentation.
- Overall result: Pass/Fail with a defect register for failed items.
- Declaration and signatures: inspector sign-off and supervisor/reviewer acknowledgement.
How to use this generator inspection checklist
- Record generator details (asset ID, make/model, run hours, site and date) at the top of the form.: Note the asset ID or serial number, make and model, current run hours from the hour meter, site location and the date. This links the inspection to the specific generator and its maintenance schedule.
- Inspect each item in sequence - working from external/physical through fluids, engine, electrical output and controls, then safety and compliance. Mark Pass, Fail or N/A for each item.: Check housing and frame for damage, verify fuel and oil levels, inspect belts and hoses, test the RCD with the push-button test, confirm earthing is connected, check all outlet sockets and cables for damage, and verify the emergency stop button functions correctly.
- For any Fail item, add a note describing the fault. Do not operate the generator until the fault has been assessed and rectified or formally approved.: Describe the fault clearly so a maintenance technician or electrician can assess it without re-inspecting. Tag the generator as out of service if the fault poses an electrical safety or fire risk. Critical faults such as faulty RCDs or damaged earthing must be rectified before use.
- Complete the overall result (Pass/Fail) and record all failed items in the defects register with the action taken and who it was reported to.: Summarise all failed items in the defects table at the bottom of the form. Record the action taken (repaired on site, reported to maintenance, generator taken out of service) and the name of the person the fault was reported to.
- Sign and date the declaration. The supervisor or reviewer signs the acknowledgement section.: Your signature as inspector confirms you have completed the inspection honestly and accurately. The supervisor signature acknowledges the findings and confirms any corrective actions have been raised or completed.
- Keep the completed form with the asset record or file it as required by your site procedures. Save as PDF using Print then Save as PDF in your browser.: Store the completed checklist against the generator asset record for maintenance history and audit purposes. Digital forms in MapTrack automatically link to the asset, building a complete inspection and service history over time.
In MapTrack, you can digitise safety inspections and compliance forms. Each submission is stored as a timestamped PDF against the asset record.
Get the free templateEnter your email above to download the full generator inspection checklist as a PDF.Back to download formHow often should you complete this checklist?
Complete a generator inspection before each use or at the start of each shift. For standby or hire generators that are infrequently used, inspect the unit before starting even if it has been sitting idle - fluid levels drop, batteries discharge and pests can damage wiring during storage.
Beyond daily pre-use checks, generator manufacturers typically require service intervals at 250, 500 and 1,000 run hours (or annually, whichever comes first). Site procedures, the principal contractor's electrical safety management plan or applicable Australian Standards may also specify additional periodic inspection frequencies. Follow whichever interval is most stringent. Organisations managing multiple generators should maintain a centralised register that tracks each unit's inspection dates, run hours and next service milestone.
Frequently asked questions
Applicable regulatory standards
This template aligns with the following regulations and standards:
- AS/NZS 3010:2017 - Electrical installations: Generating sets
- AS/NZS 3000:2018 - Electrical installations (Wiring Rules)
- AS/NZS 3760:2022 - In-service safety inspection and testing of electrical equipment
- WHS Regulations 2011 - Chapter 5, Part 5.1 (general duties for plant)
Generator inspection checklist preview
The numbers behind this generator inspection checklist
Every figure below is sourced and dated, so you can quote it in a toolbox talk, a budget case or a board paper without having to chase the original report.
Embed this free template on your website
Run an industry blog, trade association site, or training resource? Drop a preview of this free generator inspection checklist straight into your page. The snippet is self-contained, needs no scripts, and links readers back to the full free template.
<div style="max-width:480px;font-family:system-ui,-apple-system,'Segoe UI',Roboto,sans-serif;border:1px solid #E5E7EB;border-radius:12px;padding:20px;background:#ffffff;">
<p style="font-size:12px;font-weight:700;letter-spacing:0.05em;text-transform:uppercase;color:#071D49;margin:0;">Free template</p>
<p style="font-size:18px;font-weight:700;color:#071D49;margin:6px 0 0;">Generator inspection checklist</p>
<ul style="margin:12px 0 0;padding-left:18px;color:#374151;font-size:14px;line-height:1.6;">
<li style="margin:4px 0;">Generator details: asset ID/serial, make/model, site/location, date, inspector name, current run hours and next service due.</li>
<li style="margin:4px 0;">External and physical condition: housing, ventilation, frame and mounting, exhaust, fuel system, spill containment bund, labels and general cleanliness.</li>
<li style="margin:4px 0;">Fluids and levels: engine oil, coolant, fuel level and visible leaks.</li>
<li style="margin:4px 0;">Engine and mechanical: air filter, drive belts, cooling fan and guard, battery, hoses, start-up behaviour and unusual noises or vibration.</li>
<li style="margin:4px 0;">Electrical output and controls: output voltage and frequency, control panel indicators, circuit breakers/MCBs, RCD/safety switch (push-button test), earth/ground connection, cables and leads, outlet sockets, auto-start/transfer switch, emergency stop and hour meter reading.</li>
<li style="margin:4px 0;">Safety equipment: fire extinguisher, PPE requirements and exclusion zone.</li>
</ul>
<p style="font-size:13px;color:#6B7280;margin:14px 0 0;padding-top:12px;border-top:1px solid #E5E7EB;">Free <a href="https://www.maptrack.com/templates/generator-inspection-checklist" style="color:#071D49;font-weight:600;text-decoration:none;">Generator inspection checklist</a> by MapTrack</p>
</div>Free to reuse, including commercially. This template is published under a Creative Commons Attribution 4.0 licence. Copy it, adapt it, put it on your own site or in your own docs. All we ask is that you credit MapTrack with a link back to this page. The snippet above already includes that credit, so if you use it as-is you’re covered.
Cite this template
Writing about this topic? You’re welcome to quote this checklist. Here’s the wording to use so your readers can find the original.
The MapTrack generator inspection checklist contains 37 checks across 6 sections.
- Short attribution
- MapTrack Generator inspection checklist, https://www.maptrack.com/templates/generator-inspection-checklist
- Reference list
- MapTrack. (2026). Generator inspection checklist [Checklist template]. Retrieved from https://www.maptrack.com/templates/generator-inspection-checklist
Free to reuse with credit under a Creative Commons Attribution 4.0 licence. If you’d rather link straight to it, the page is https://www.maptrack.com/templates/generator-inspection-checklist.
Need to digitise safety inspections and compliance forms?
Register every generator in MapTrack, attach digital forms, and get a complete history of every inspection, service and compliance record.
Compliance and inspections · All templates · Pricing · Book a demo