Free contractor prequalification checklist
Free contractor prequalification checklist (PDF-ready). Assess WHS systems, insurance, licences and past performance before engaging contractors.
Updated 3 May 2026
Contractor Prequalification Checklist
Assessment of contractor safety systems, insurance, licences and past performance prior to engagement.
Company & Legal Standing
WHS Management System
Insurance (certificates of currency sighted)
Licences & Qualifications
Incident History & Performance
Plant, Equipment & SWMS
Subcontractor & Environmental Management
References
Assessor Sign-off
Signature
Print name
Position
Date
How to use: download the PDF, print or complete digitally on any device.
- PDF format, ready to print or fill on screen
- Use as-is or customise to suit your operation
- Go digital in MapTrack for photos, alerts and audit trails
Two ways to use it
Use in MapTrack →Use it digitally instead
Unlimited usersThese same 31 checks, already built.
- Scan the asset’s QR tag with any phone
- Submitted forms can trigger alerts
- Photos on fails, audit-ready records
- Export responses, PDF reports with your logo
Free trial. No credit card needed.
Trusted by teams across Australia and New Zealand
We respect your privacy. Unsubscribe anytime.
These templates are free general guides provided as-is. They do not constitute legal, safety or compliance advice. You are responsible for ensuring any form meets your specific workplace obligations, industry standards and applicable regulations.
Don't just download it - use it live. Start a free workspace with this contractor prequalification checklist already built, so your crew can run it from a phone.
Commercial Director
Key takeaways
- The MapTrack contractor prequalification checklist contains 31 checks across 8 sections. Sections covered: Company & Legal Standing, WHS Management System, Insurance (certificates of currency sighted), Licences & Qualifications, Incident History & Performance, Plant, Equipment & SWMS, Subcontractor & Environmental Management, References.
Enter your email below to download this contractor prequalification checklist as a ready-to-use PDF.
Used by construction, mining and field service teams
What is a contractor prequalification checklist?
A contractor prequalification checklist is a systematic assessment document used to evaluate a contractor safety management capability, compliance credentials and technical competence before they are engaged to perform work. The checklist covers areas such as the contractor WHS management system, safety policies and procedures, risk assessment and SWMS capability, incident history, workers compensation and public liability insurance, licences and qualifications, training records, environmental management, previous project references and financial standing. Each requirement is assessed against documented evidence, and the overall outcome determines whether the contractor is approved, conditionally approved or not approved for engagement.
Prequalification is a critical upstream risk control. By assessing a contractor WHS systems and track record before they arrive on site, the hiring organisation can filter out contractors who lack the safety capability to work safely. This is particularly important in high-risk industries such as construction, mining, oil and gas, and facilities management, where contractors perform a large proportion of the work and account for a disproportionate share of workplace injuries. Under the WHS Act, PCBUs who engage contractors must exercise due diligence and ensure, so far as is reasonably practicable, that the contractor can carry out the work safely. A documented prequalification process is the standard method for demonstrating this due diligence, and is referenced as best practice in AS/NZS 4801 and ISO 45001.
Learn more about compliance and inspections in MapTrack.
Benefits of using this contractor prequalification checklist
- Upstream risk control: identify and filter out contractors who lack adequate safety systems, insurance or qualifications before they arrive on site.
- Due diligence evidence: demonstrate to regulators, clients and auditors that the organisation assessed contractor safety capability before engagement.
- Insurance verification: confirm that contractors hold current workers compensation, public liability and, where required, professional indemnity insurance at adequate levels.
- Licence and competency validation: verify that contractors and their workers hold the licences, tickets and qualifications required for the work scope.
- Incident history assessment: review the contractor past safety performance, including lost time injury frequency rate, notifiable incidents and enforcement actions.
- Consistency: a standardised checklist ensures every contractor is assessed against the same criteria, removing subjectivity from the approval process.
Benefits of digitising forms in MapTrack
When you move your checklists from paper to MapTrack, you get:
- Field users can easily scan a QR code to complete a form on mobile. Unlimited users.
- Automatically get alerts when faults are identified.
- Link every form digitally as a PDF to the relevant asset, location or person.
- Receive a digital PDF copy with every submission to your email.
- Ability to share forms digitally.
- Build conditional logic (show or hide questions based on answers).
- Take pictures or attach photos. Not possible with a paper-based form.
- Electronic signatures.
- Edit forms later without reprinting.
- Restrict permissions (who can view, complete or approve).
- Build forms with AI (describe what you need and MapTrack suggests the form).
- Escalate critical hazards instantly to safety managers via push notification.
- Maintain an auditable safety register that satisfies WHS regulator requests.
- Correlate incident trends across sites with built-in safety analytics.
Book a demo to see how MapTrack handles checklists.
Try MapTrack free for 30 days
Full access to every feature. No credit card required. Per-asset pricing so you scale as your fleet grows.
- No credit card required
- 30 days free trial
- Cancel anytime
1-2 days/week saved
“Bloody amazing! We used to spend 1-2 days a week tracking and managing our generators alone.”
Steve McAllister
Asset Coordinator, Saunders International
What to include in a contractor prequalification checklist
This contractor prequalification checklist covers 11 key areas:
- Contractor details: company name, ABN/ACN, trading name, contact person, address, phone, email, scope of work description.
- WHS management system: does the contractor have a documented WHS management system, policy, objectives and procedures? Certified to ISO 45001 or AS/NZS 4801? Evidence sighted.
- Risk management: can the contractor demonstrate risk assessment, SWMS, JSA and hazard identification processes? Examples provided and reviewed.
- Incident and injury history: lost time injury frequency rate (LTIFR), total recordable injury frequency rate (TRIFR), notifiable incidents in last 3 years, regulatory notices or prosecutions.
- Insurance: current certificate of currency for workers compensation, public liability (minimum $10M or as per contract), professional indemnity (if applicable), motor vehicle insurance.
- Licences and qualifications: relevant trade licences, high-risk work licences, competency cards, accreditations (e.g. electrical licence, demolition licence, asbestos removal licence).
- Training records: site-specific induction training, WHS general induction (e.g. white card / construction induction), first aid, working at heights, confined space, specific equipment training.
- Subcontractor management: does the contractor engage subcontractors? If so, what prequalification process do they apply to their own subcontractors?
- Environmental management: does the contractor have environmental management procedures covering waste, spills, dust, noise and heritage protection?
- References and past performance: minimum two project references from the last 24 months, referee contact details, scope and value of referenced work.
- Assessment outcome: approved, conditionally approved (with noted conditions) or not approved. Assessor name, signature and date. Approval validity period.
How to use this contractor prequalification checklist
- Issue the prequalification checklist to the prospective contractor and request documentary evidence for each assessment area.: Provide the checklist along with clear instructions on what evidence is required, such as copies of insurance certificates, licences, WHS policies, training registers and incident statistics. Set a reasonable deadline for submission and nominate a contact person for queries.
- Review the contractor WHS management system, policies and procedures against the requirements on the checklist.: Check whether the contractor has a documented WHS management system with clear policies, objectives, hazard identification, risk assessment and incident investigation procedures. Note whether the system is certified to ISO 45001 or AS/NZS 4801. Assess the quality and currency of SWMS and JSA examples provided.
- Verify insurance certificates of currency, checking policy types, coverage amounts, expiry dates and that the named insured matches the contracting entity.: Confirm workers compensation, public liability (minimum $10 million or as specified in the contract) and any additional insurance requirements. Check expiry dates and ensure coverage will remain current for the duration of the proposed work. Contact the insurer or broker to verify certificates if in doubt.
- Validate licences, qualifications and training records for the contractor and the workers who will be performing the work.: Confirm that trade licences, high-risk work licences and competency cards are current and issued by the relevant authority. Check that workers hold a current general construction induction (white card) where required. Verify any specialist training such as working at heights, confined space entry or asbestos awareness.
- Review the contractor incident and injury history for the last three years, including LTIFR, notifiable incidents and regulatory actions.: Request the contractor safety statistics for the last three years. Compare their LTIFR and TRIFR against industry benchmarks. Ask about any notifiable incidents, improvement notices, prohibition notices or prosecutions. A high injury rate or unresolved enforcement actions may indicate systemic safety problems.
- Contact the nominated referees to verify the contractor past performance on comparable projects.: Contact at least two referees and ask about the contractor safety performance, quality of work, compliance with site rules, responsiveness to issues and overall reliability. Document the referee feedback on the checklist or attach a separate reference check record.
- Record the assessment outcome (approved, conditionally approved or not approved), sign and date the checklist, and set the approval validity period.: Document the rationale for the assessment outcome. If conditionally approved, clearly state the conditions that must be met before the contractor starts work. Set an approval validity period, typically 12 to 24 months, after which a reassessment is required. File the completed checklist and all supporting evidence in the contractor register.
In MapTrack, you can digitise safety inspections and compliance forms. Each submission is stored as a timestamped PDF against the asset record.
Get the free templateEnter your email above to download the full contractor prequalification checklist as a PDF.Back to download formHow often should you complete this checklist?
Contractor prequalification should be completed before the contractor is first engaged, and reassessed at least every 12 to 24 months for ongoing contractors. Many organisations require annual reassessment, particularly in high-risk industries such as construction and mining. A reassessment should also be triggered when the contractor scope of work changes significantly, when their insurance or licences are due to expire, after a serious safety incident or regulatory action, or when a new principal contractor takes over a project. Insurance certificates of currency should be checked at the start of each new project or engagement, even within the approval period.
Under WHS Act 2011, Section 46, the PCBU has a duty to ensure that contractors engaged to carry out work are competent and adequately insured. A documented prequalification process demonstrates that the PCBU took reasonable steps to verify contractor capability before engagement.
Frequently asked questions
Applicable regulatory standards
This template aligns with the following regulations and standards:
- WHS Act 2011 (PCBU duty of care, due diligence)
- AS/NZS 4801 (OHS management systems)
- ISO 45001 (occupational health and safety management systems)
Contractor Prequalification Checklist preview
The numbers behind this contractor prequalification checklist
Every figure below is sourced and dated, so you can quote it in a toolbox talk, a budget case or a board paper without having to chase the original report.
Embed this free template on your website
Run an industry blog, trade association site, or training resource? Drop a preview of this free contractor prequalification checklist straight into your page. The snippet is self-contained, needs no scripts, and links readers back to the full free template.
<div style="max-width:480px;font-family:system-ui,-apple-system,'Segoe UI',Roboto,sans-serif;border:1px solid #E5E7EB;border-radius:12px;padding:20px;background:#ffffff;">
<p style="font-size:12px;font-weight:700;letter-spacing:0.05em;text-transform:uppercase;color:#071D49;margin:0;">Free template</p>
<p style="font-size:18px;font-weight:700;color:#071D49;margin:6px 0 0;">Contractor Prequalification Checklist</p>
<ul style="margin:12px 0 0;padding-left:18px;color:#374151;font-size:14px;line-height:1.6;">
<li style="margin:4px 0;">Contractor details: company name, ABN/ACN, trading name, contact person, address, phone, email, scope of work description.</li>
<li style="margin:4px 0;">WHS management system: does the contractor have a documented WHS management system, policy, objectives and procedures? Certified to ISO 45001 or AS/NZS 4801? Evidence sighted.</li>
<li style="margin:4px 0;">Risk management: can the contractor demonstrate risk assessment, SWMS, JSA and hazard identification processes? Examples provided and reviewed.</li>
<li style="margin:4px 0;">Incident and injury history: lost time injury frequency rate (LTIFR), total recordable injury frequency rate (TRIFR), notifiable incidents in last 3 years, regulatory notices or prosecutions.</li>
<li style="margin:4px 0;">Insurance: current certificate of currency for workers compensation, public liability (minimum $10M or as per contract), professional indemnity (if applicable), motor vehicle insurance.</li>
<li style="margin:4px 0;">Licences and qualifications: relevant trade licences, high-risk work licences, competency cards, accreditations (e.g. electrical licence, demolition licence, asbestos removal licence).</li>
</ul>
<p style="font-size:13px;color:#6B7280;margin:14px 0 0;padding-top:12px;border-top:1px solid #E5E7EB;">Free <a href="https://www.maptrack.com/templates/contractor-prequalification-checklist" style="color:#071D49;font-weight:600;text-decoration:none;">Contractor Prequalification Checklist</a> by MapTrack</p>
</div>Free to reuse, including commercially. This template is published under a Creative Commons Attribution 4.0 licence. Copy it, adapt it, put it on your own site or in your own docs. All we ask is that you credit MapTrack with a link back to this page. The snippet above already includes that credit, so if you use it as-is you’re covered.
Cite this template
Writing about this topic? You’re welcome to quote this checklist. Here’s the wording to use so your readers can find the original.
The MapTrack contractor prequalification checklist contains 31 checks across 8 sections.
- Short attribution
- MapTrack Contractor Prequalification Checklist, https://www.maptrack.com/templates/contractor-prequalification-checklist
- Reference list
- MapTrack. (2026). Contractor Prequalification Checklist [Checklist template]. Retrieved from https://www.maptrack.com/templates/contractor-prequalification-checklist
Free to reuse with credit under a Creative Commons Attribution 4.0 licence. If you’d rather link straight to it, the page is https://www.maptrack.com/templates/contractor-prequalification-checklist.
Need to digitise safety inspections and compliance forms?
Register every asset in MapTrack, attach digital forms, and get a complete history of every inspection, service and compliance record.
Compliance and inspections · All templates · Pricing · Book a demo