Free equipment fault report
Download a free equipment fault report. Document symptoms, severity, suspected cause and corrective actions. PDF ready to print.
Updated 3 May 2026
Equipment Fault Report
Equipment breakdown and fault notification form
Fault Description
Impact Assessment
Immediate Actions
Root Cause Investigation
Repair and Resolution
Reporter Sign-off
Signature
Print name
Date
Maintenance Manager Sign-off
Signature
Print name
Date
How to use: download the PDF, print or complete digitally on any device.
- PDF format, ready to print or fill on screen
- Use as-is or customise to suit your operation
- Go digital in MapTrack for photos, alerts and audit trails
Two ways to use it
Use in MapTrack →Use it digitally instead
Unlimited usersThese same 25 checks, already built.
- Scan the asset’s QR tag with any phone
- Submitted forms can trigger alerts
- Photos on fails, audit-ready records
- Export responses, PDF reports with your logo
Free trial. No credit card needed.
Trusted by teams across Australia and New Zealand
We respect your privacy. Unsubscribe anytime.
These templates are free general guides provided as-is. They do not constitute legal, safety or compliance advice. You are responsible for ensuring any form meets your specific workplace obligations, industry standards and applicable regulations.
Don't just download it - use it live. Start a free workspace with this equipment fault report already built, so your crew can run it from a phone.
Commercial Director
Key takeaways
- The MapTrack equipment fault report contains 25 checks across 5 sections. Sections covered: Fault Description, Impact Assessment, Immediate Actions, Root Cause Investigation, Repair and Resolution.
Enter your email below to download this equipment fault report as a ready-to-use PDF.
Used by construction, mining and field service teams
What is a equipment fault report?
An equipment fault report is a document used to record and communicate a fault or malfunction observed on a piece of equipment. The report captures the equipment details, fault description, symptoms observed, severity assessment, suspected cause, immediate actions taken and recommended corrective actions. Fault reports are the first step in the corrective maintenance process, initiating the work flow from fault identification through diagnosis, repair and return to service.
Prompt and accurate fault reporting is essential for maintaining equipment reliability and workplace safety. Under Section 19 of the WHS Act 2011, the PCBU has a duty of care to ensure that plant is maintained in a safe condition. If a fault creates a safety hazard and is not reported, the organisation is exposed to both WHS enforcement action and liability for any resulting injury. Beyond safety, unresolved faults lead to progressive deterioration, more expensive repairs and unplanned downtime. A structured fault reporting process ensures that faults are captured, prioritised and resolved systematically rather than being overlooked or forgotten.
Learn more about asset tracking in MapTrack.
Benefits of using this equipment fault report
- Early intervention: capturing faults when first observed prevents minor issues from escalating into major failures.
- Safety compliance: reporting safety-related faults immediately meets WHS obligations for maintaining safe plant and equipment.
- Maintenance efficiency: structured fault reports give maintenance teams the information they need to diagnose and plan repairs.
- Downtime reduction: prompt reporting and repair reduces the duration and impact of unplanned equipment downtime.
- Trend analysis: tracking fault reports by equipment, fault type and frequency reveals reliability issues and informs replacement decisions.
- Accountability: a signed fault report creates a documented record of who identified the fault, when and what actions were taken.
Benefits of digitising forms in MapTrack
When you move your reports from paper to MapTrack, you get:
- Field users can easily scan a QR code to complete a form on mobile. Unlimited users.
- Automatically get alerts when faults are identified.
- Link every form digitally as a PDF to the relevant asset, location or person.
- Receive a digital PDF copy with every submission to your email.
- Ability to share forms digitally.
- Build conditional logic (show or hide questions based on answers).
- Take pictures or attach photos. Not possible with a paper-based form.
- Electronic signatures.
- Edit forms later without reprinting.
- Restrict permissions (who can view, complete or approve).
- Build forms with AI (describe what you need and MapTrack suggests the form).
- Maintain a live asset register with location, condition and custody history.
- Schedule and track calibration, certification and warranty expiry dates.
- Generate depreciation and total-cost-of-ownership reports per asset.
Book a demo to see how MapTrack handles reports.
Try MapTrack free for 30 days
Full access to every feature. No credit card required. Per-asset pricing so you scale as your fleet grows.
- No credit card required
- 30 days free trial
- Cancel anytime
1-2 days/week saved
“Bloody amazing! We used to spend 1-2 days a week tracking and managing our generators alone.”
Steve McAllister
Asset Coordinator, Saunders International
What to include in a equipment fault report
This equipment fault report covers 11 key areas:
- Reporter details: name, position, department, date and time fault was observed.
- Equipment details: asset ID, description, make/model, serial number, location.
- Fault description: clear description of the fault, including symptoms, abnormal behaviour, error codes or messages.
- When the fault was first noticed: during pre-start inspection, during operation, during maintenance, after an incident.
- Severity: critical (safety hazard or complete failure), major (significant performance impact), minor (reduced performance), cosmetic.
- Immediate actions taken: equipment isolated, locked out, tagged out, barricaded, reported to supervisor.
- Suspected cause: operator observation of what may have caused the fault (overloading, wear, impact, contamination, electrical fault).
- Operational impact: is the equipment still operational (yes, with restrictions, no), estimated downtime.
- Photographs: images of the fault, error displays, damage or abnormal condition.
- Corrective action recommended: repair, replacement of component, full service, specialist assessment.
- Signatures: reporter and supervisor acknowledgement.
How to use this equipment fault report
- Stop using the equipment if the fault presents a safety hazard and apply isolation controls.: If the fault could cause injury, property damage or further equipment damage, stop the equipment immediately. Apply lockout/tagout if appropriate. Barricade the equipment if it is in a high-traffic area. Do not attempt to operate faulty equipment.
- Complete the fault report with a clear, specific description of the fault.: Describe what you observed: the symptoms, any abnormal sounds, smells, vibrations, error messages or visual damage. Be specific. State when the fault was first noticed and whether it was intermittent or constant. Include any error codes displayed.
- Assess the severity and record the operational impact.: Rate the severity as critical, major, minor or cosmetic. Note whether the equipment can still be used (with restrictions), or whether it is completely out of service. Estimate the operational impact in terms of downtime and production loss.
- Take photographs and note any suspected cause.: Photograph the fault from multiple angles. If an error code or message is displayed, photograph the screen. Record your observation of what may have caused the fault. This information helps the maintenance team plan the repair efficiently.
- Submit the fault report to your supervisor and maintenance team for action.: Hand the completed report to your supervisor or submit it through the maintenance request system. The maintenance team will review the report, prioritise the repair based on severity and schedule the corrective work. Follow up if the fault is not addressed within the expected timeframe.
In MapTrack, you can manage your full asset register digitally. Each submission is stored as a timestamped PDF against the asset record.
Get the free templateEnter your email above to download the full equipment fault report as a PDF.Back to download formHow often should you complete this report?
An equipment fault report should be completed every time a fault or malfunction is observed. There is no scheduled interval. The trigger is the observation of a fault. Workers should be encouraged to report all faults, no matter how minor, as early detection prevents costly failures.
Frequently asked questions
Equipment fault report preview
The numbers behind this equipment fault report
Every figure below is sourced and dated, so you can quote it in a toolbox talk, a budget case or a board paper without having to chase the original report.
Embed this free template on your website
Run an industry blog, trade association site, or training resource? Drop a preview of this free equipment fault report straight into your page. The snippet is self-contained, needs no scripts, and links readers back to the full free template.
<div style="max-width:480px;font-family:system-ui,-apple-system,'Segoe UI',Roboto,sans-serif;border:1px solid #E5E7EB;border-radius:12px;padding:20px;background:#ffffff;">
<p style="font-size:12px;font-weight:700;letter-spacing:0.05em;text-transform:uppercase;color:#071D49;margin:0;">Free template</p>
<p style="font-size:18px;font-weight:700;color:#071D49;margin:6px 0 0;">Equipment fault report</p>
<ul style="margin:12px 0 0;padding-left:18px;color:#374151;font-size:14px;line-height:1.6;">
<li style="margin:4px 0;">Reporter details: name, position, department, date and time fault was observed.</li>
<li style="margin:4px 0;">Equipment details: asset ID, description, make/model, serial number, location.</li>
<li style="margin:4px 0;">Fault description: clear description of the fault, including symptoms, abnormal behaviour, error codes or messages.</li>
<li style="margin:4px 0;">When the fault was first noticed: during pre-start inspection, during operation, during maintenance, after an incident.</li>
<li style="margin:4px 0;">Severity: critical (safety hazard or complete failure), major (significant performance impact), minor (reduced performance), cosmetic.</li>
<li style="margin:4px 0;">Immediate actions taken: equipment isolated, locked out, tagged out, barricaded, reported to supervisor.</li>
</ul>
<p style="font-size:13px;color:#6B7280;margin:14px 0 0;padding-top:12px;border-top:1px solid #E5E7EB;">Free <a href="https://www.maptrack.com/templates/equipment-fault-report" style="color:#071D49;font-weight:600;text-decoration:none;">Equipment fault report</a> by MapTrack</p>
</div>Free to reuse, including commercially. This template is published under a Creative Commons Attribution 4.0 licence. Copy it, adapt it, put it on your own site or in your own docs. All we ask is that you credit MapTrack with a link back to this page. The snippet above already includes that credit, so if you use it as-is you’re covered.
Cite this template
Writing about this topic? You’re welcome to quote this checklist. Here’s the wording to use so your readers can find the original.
The MapTrack equipment fault report contains 25 checks across 5 sections.
- Short attribution
- MapTrack Equipment fault report, https://www.maptrack.com/templates/equipment-fault-report
- Reference list
- MapTrack. (2026). Equipment fault report [Checklist template]. Retrieved from https://www.maptrack.com/templates/equipment-fault-report
Free to reuse with credit under a Creative Commons Attribution 4.0 licence. If you’d rather link straight to it, the page is https://www.maptrack.com/templates/equipment-fault-report.
Need to manage your full asset register digitally?
Register every asset in MapTrack, attach digital forms, and get a complete history of every inspection, service and compliance record.