Unplanned equipment downtime costs a construction site US$2,000 to US$10,000 a day and a large mining haul truck US$5,000 to US$10,000 an hour, on figures published by the Construction Industry Institute and McKinsey. Across industry as a whole, Siemens and Senseye put an hour of unplanned stoppage between about US$36,000 in fast-moving consumer goods and US$2.3 million in a large automotive plant.
MapTrack compiled the 16 figures on this page from 13 published sources. Each one is shown with the organisation that published it and the year it was published, and links to the original document.
Cited industry data on the financial impact of unplanned equipment downtime across manufacturing, construction, mining, and SME operations. Every statistic links to its original source. Click “Cite this statistic” to get a pre-formatted citation with a link back to this page.
Last updated: August 2026 · 16 statistics · Free to cite with attribution
GM of Operations
The financial impact of unplanned equipment downtime varies dramatically by industry, but the pattern is consistent: every hour of unexpected stoppage costs far more than the repair itself.
US$36,000–$2.3m per hour
An hour of unplanned downtime costs from around US$36,000 in fast-moving consumer goods to US$2.3 million in a large automotive plant.
Source: Siemens / Senseye, The True Cost of Downtime 2024 ()
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#downtime-cost-manufacturing
$2,000–$10,000 per day
When critical equipment is unavailable on a construction site, project delays can cost between $2,000 and $10,000 per day in idle labour, missed milestones, and subcontractor penalties.
Source: Widely attributed to the Construction Industry Institute; attribution not verified ()
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#downtime-construction-daily
$5,000–$10,000 per hour
Unplanned downtime for a large mining haul truck costs between $5,000 and $10,000 per hour, factoring in lost haulage capacity, idle crew wages, and contract penalties. In open-pit operations where every truck is scheduled against tight production targets, even a few hours of downtime can cascade into significant revenue loss.
Source: McKinsey Mining Operations Research ()
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#downtime-mining-hourly
When hourly and daily costs compound over a full year, the business impact becomes staggering. These benchmarks quantify the aggregate toll of unplanned downtime on revenue and total cost of ownership.
800 hours
The average manufacturing plant experiences approximately 800 hours of unplanned equipment downtime per year, equivalent to more than 15 hours per week.
Source: Deloitte Advanced Manufacturing Report ()
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#downtime-hours-annual
11%
Fortune Global 500 companies lose approximately 11% of their yearly revenue to unplanned downtime, amounting to nearly $1.5 trillion across those organisations.
Source: Siemens / Senseye, The True Cost of Downtime 2024 ()
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#downtime-lost-revenue
$50,000–$180,000 per year
Total cost of ownership for a single commercial vehicle ranges from $50,000 to $180,000 per year, encompassing fuel, insurance, maintenance, depreciation, registration, and driver costs. Without accurate tracking, fleet managers often underestimate true per-vehicle costs by 20 to 30%.
Source: American Transportation Research Institute ()
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#fleet-tco-annual
A statistic repeated across vendor blogs and AI answers starts to look authoritative through repetition alone. Before citing a downtime figure, the question is not whether it sounds plausible but whether anyone measured it. Each check below traces one widely-quoted claim to its primary document, or says plainly that no measurement was found. If you have a primary source for a claim marked here, contact us and we will verify and cite it.
Misattributed
The most-quoted downtime figure in industrial maintenance is credited to Deloitte, but Deloitte relayed it from a WSJ Custom Content page that cites no survey or method.
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#downtime-50-billion-claim-check
Same unsourced origin
The companion figure, that equipment failure causes 42% of unplanned downtime, appears in the same sentence pair on the same WSJ Custom Content page, with the same absence of any survey, sample or method.
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#downtime-42-percent-equipment-failure-claim-check
Small and medium enterprises face proportionally higher risk from equipment downtime, where a single week of lost availability can consume an entire month of profit.
$1,000–$5,000 per day
Small and medium enterprises report average unplanned downtime costs of $1,000 to $5,000 per day, with 82% of affected businesses saying the impact is significant enough to warrant dedicated prevention investment. For many SMEs, a single week of equipment downtime can wipe out an entire month of profit.
Source: Salesforce Small Business Survey ()
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#downtime-sme-daily
Organisations that rely on fix-it-when-it-breaks maintenance pay dramatically more per repair and experience more frequent disruptions than those with structured preventive programs.
up to 30–40%
US Department of Energy analysis puts the savings opportunity of a predictive program at up to 30-40% versus reactive-heavy operations, with preventive alone saving 12-18%. Emergency work carries expedited parts, overtime labour and secondary damage. The often-quoted "reactive costs 3-9x more" multiplier has no checkable primary source, so we publish the DOE percentages instead.
Source: US Department of Energy / PNNL, O&M Best Practices Guide ()
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#downtime-reactive-cost
9%
An Allianz analysis of 534,456 corporate insurance claims found that faulty workmanship and maintenance incidents are the third largest cause of loss by value, accounting for 9% of claims value and 7% of claims by number.
Source: Allianz Global Corporate & Specialty, Global Claims Review 2022 ()
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#insured-loss-faulty-workmanship-maintenance
46.3%
Benchmark data covering roughly 1.2 million assets and 8.85 million work orders found 53.7% of vehicle maintenance was scheduled, 40.1% unscheduled and 6.2% emergency, so unplanned work accounted for 46.3% of the total. Unplanned work carries expedited parts, overtime labour and knock-on downtime.
Source: FleetOwner, reporting Fleetio benchmark data ()
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#fleet-unplanned-maintenance-ratio
Downtime is not limited to breakdowns. A significant portion of fleet capacity sits idle due to poor scheduling, lack of visibility, and fragmented planning.
40%
Construction firms report that up to 40% of their equipment fleet is idle at any given time, often because managers lack real-time visibility into availability and location.
Source: McKinsey & Company, Construction Productivity Report ()
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#idle-equipment-waste
55–70%
Average fleet utilisation rates sit between 55 and 70%, meaning 30 to 45% of fleet capacity is idle at any given time. Best-in-class operators achieve 80 to 85% utilisation through real-time visibility, dynamic scheduling, and pooled asset sharing across projects and depots.
Source: Automotive Fleet Magazine Industry Benchmarks ()
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#fleet-utilisation-benchmark
The data is clear: shifting from reactive to preventive maintenance delivers measurable cost reductions, fewer breakdowns, and longer asset lifespans.
12–18%
A preventive maintenance program saves an estimated 12% to 18% over running equipment to failure.
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#pm-savings
$0.15–$0.25 per km
Average commercial vehicle maintenance costs range from $0.15 to $0.25 per kilometre, with reactive-only fleets paying 30 to 40% more than those with structured preventive programs. Tracking odometer readings and service intervals digitally helps fleet managers stay on the preventive side of the curve.
Source: American Transportation Research Institute ()
Cite as: MapTrack Industry Statistics, https://www.maptrack.com/statistics/equipment-downtime-cost#fleet-maintenance-cost-km
MapTrack gives you scheduled servicing, odometer-based triggers, and real-time equipment health monitoring.
Every statistic on this page is drawn from publicly accessible industry reports, government agencies, or peer-reviewed research. We do not use paywalled, self-reported vendor data, or unverifiable claims. Each data point links to its original source so readers and journalists can verify independently.
Statistics are reviewed quarterly and updated when newer data becomes available. Where a range is cited (e.g. “10% to 15%”), it reflects variation across studies or industries rather than a single point estimate. All monetary figures are shown in their original reported currency.
Manufacturing runs from about US$36,000 per hour in fast-moving consumer goods to US$2.3 million per hour in a large automotive plant (Siemens/Senseye). Mining haul trucks cost $5,000 to $10,000 per hour (McKinsey). Construction sites face $2,000 to $10,000 per day in idle labour, missed milestones, and subcontractor penalties.
The average manufacturing plant experiences 800 hours of unplanned downtime per year per facility, according to Deloitte. That is equivalent to more than 15 hours per week of lost production capacity.
Multiply your hourly downtime cost (lost production plus idle labour plus penalties) by total hours of unplanned downtime. Fortune Global 500 companies lose approximately 11% of annual revenue to unplanned downtime, according to Siemens and Senseye.
Fleets without digital maintenance systems average 40% to 55% reactive (unplanned) maintenance, compared to 15% to 20% for those using CMMS software. The gap directly translates into more frequent breakdowns and higher repair costs.
Preventive maintenance programs save 12% to 18% on total maintenance costs according to the US Department of Energy, and DOE puts the savings opportunity of a predictive program at up to 30% to 40% versus reactive-heavy operations. Emergency work carries expedited parts, overtime labour, and secondary damage.
Manufacturing leads at up to US$2.3 million per hour in large automotive plants, followed by mining ($5,000 to $10,000 per hour for haul trucks), construction ($2,000 to $10,000 per day), and SMEs ($1,000 to $5,000 per day).
Downtime Cost Calculator
Estimate the financial impact of unplanned equipment downtime on your operations.
Fleet Management Statistics
Cited data on fleet downtime costs, fuel waste, maintenance benchmarks, and GPS tracking ROI.
Maintenance Features
Digital work orders, scheduled servicing, and odometer-based maintenance triggers.
All Industry Statistics
Browse the full collection of cited asset tracking and equipment management statistics.
GPS Tracking Features
Real-time location, geofence alerts, and route history for every asset in your fleet.
CMMS for equipment compared
Which platforms cut unplanned downtime, and how their scheduling and work-order handling differs.
Join construction, mining and field service teams across Australia.
4.9 on G2 · 5.0 on Capterra
